These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Improving enzymatic hydrolysis efficiency of corncob residue through sodium sulfite pretreatment.
    Author: Chen H, Jiang L, Cheng Y, Lu J, Lv Y, Yan J, Wang H.
    Journal: Appl Microbiol Biotechnol; 2019 Sep; 103(18):7795-7804. PubMed ID: 31388733.
    Abstract:
    The effects of sodium sulfite pretreatment on the delignification rate, cellulose content, enzymatic hydrolysis efficiency, and glucose yield of corncob residues (CCR) were investigated. The optimum pretreatment conditions were as follows: 12% sodium sulfite, with a pH value of 7, a temperature of 160 °C, and a holding time of 20 min. Under the optimal conditions, the cellulose content in the pretreated residue was 85.17%, and sodium lignosulfonate with a sulfonation degree of 0.677 mmol/g was obtained in the waste liquids. A delignification rate of 77.45% was also achieved after the pretreatment. Enzymatic hydrolysis of pretreated CCR was carried out with cellulase (5 FPU/g substrate) and β-glucosidase (10 IU/g substrate) for 48 h. The untreated CCR were hydrolyzed using cellulase (20 FPU/g substrate) and β-glucosidase (10 IU/g substrate) for 48 h. The comparison results showed that sodium sulfite pretreatment improved the enzymatic hydrolysis efficiency and glucose yield, which increased by 28.80% and 20.10%, respectively. These results indicated that despite the application of low cellulase dosage, high enzymatic hydrolysis efficiency substrate could be produced, and the sodium lignosulfonate which can be used for oilfields and concrete additives was obtained from the sodium sulfite-pretreated CCR.
    [Abstract] [Full Text] [Related] [New Search]