These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Dissolved Selenium(VI) Removal by Zero-Valent Iron under Oxic Conditions: Influence of Sulfate and Nitrate.
    Author: Das S, Lindsay MBJ, Essilfie-Dughan J, Hendry MJ.
    Journal: ACS Omega; 2017 Apr 30; 2(4):1513-1522. PubMed ID: 31457519.
    Abstract:
    Dissolved Se(VI) removal by three commercially available zero-valent irons (ZVIs) was examined in oxic batch experiments under circumneutral pH conditions in the presence and absence of NO3 - and SO4 2-. Environmentally relevant Se(VI) (1 mg L-1), NO3 - ([NO3-N] = 15 mg L-1), and SO4 2- (1800 mg L-1) were employed to simulate mining-impacted waters. Ninety percent of Se(VI) removal was achieved within 4-8 h in the absence of SO4 2- and NO3 -. A similar Se(VI) removal rate was observed after 10-32 h in the presence of NO3 -. Dissolved Se(VI) removal rates exhibited the highest decrease in the presence of SO4 2-; 90% of Se(VI) removal was measured after 50-191 h for SO4 2- and after 150-194 h for SO4 2- plus NO3 - depending on the ZVI tested. Despite differences in removal rates among batches and ZVI materials, Se(VI) removal consistently followed first-order reaction kinetics. Scanning electron microscopy, Raman spectroscopy, and X-ray diffraction analyses of reacted solids showed that Fe(0) present in ZVI undergoes oxidation to magnetite [Fe3O4], wüstite [FeO], lepidocrocite [γ-FeOOH], and goethite [α-FeOOH] over time. X-ray absorption near-edge structure spectroscopy indicated that Se(VI) was reduced to Se(IV) and Se(0) during removal. These results demonstrate that ZVI can be effectively used to control Se(VI) concentrations in mining-impacted waters.
    [Abstract] [Full Text] [Related] [New Search]