These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Effect of trailing-edge serrations on noise reduction in a coupled bionic aerofoil inspired by barn owls.
    Author: Li D, Liu X, Hu F, Wang L.
    Journal: Bioinspir Biomim; 2019 Dec 04; 15(1):016009. PubMed ID: 31665715.
    Abstract:
    Noise reduction is an important development direction for aircrafts and wind turbines. Owl wings have three unique morphological characteristics (leading-edge serrations, trailing-edge serrations and velvet-like surfaces) that effectively suppress aerodynamic noise in low Reynolds numbers. Among them, trailing-edge serrations are widely considered the most effective noise-reduction method. Although different serrations have been studied, the quantitative relationship and influence mechanism between the serration shape, wavelength and amplitude are poorly understood. The acoustic characteristics of asymmetrical aerofoils with different trailing-edge serrations have not been fully studied. This work investigates the flow characteristics and acoustic scattering mechanisms of novel owl-based aerofoils with different trailing-edge serrations. A sensitivity analysis is utilized to quantitatively investigate the influence and interaction mechanisms of the shape, wavelength and amplitude in trailing-edge noise reduction. Numerical simulations of the transient flow over the aerofoil are performed via the large eddy simulation method, and the acoustic far-field is obtained by solving the Ffowcs Williams and Hawkings equation. The results indicate that the sawtooth and sinusoidal serrations provide the most significant noise reduction effects; the maximum noise reduction is 8.74 dB. The wavelength and amplitude play similar roles, but the amplitude has relatively greater influence. For the sawtooth and sinusoidal serrations, the large-scale vortex structures are broken into many small-scale spiral vortex structures due to the presence of the sharp serration tip. The serrations can effectively reduce the coherence of the turbulent fluctuations due to spanwise variations in the edge and may be the main reason for noise suppression. The original owl-based aerofoil generates more low-frequency noise and less high-frequency noise than aerofoils with trailing-edge serrations. The peak noise frequencies of all aerofoils are approximately 400 Hz; hence, low-frequency noise is a dominant influence in noise generation. Furthermore, the acoustic sources generated by transient pressure fluctuations are mainly located on the serration root.
    [Abstract] [Full Text] [Related] [New Search]