These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Optimization of CO2 Adsorption on Solid-Supported Amines and Thermal Regeneration Mode Comparison.
    Author: Guo Y, Luo L, Zheng Y, Zhu T.
    Journal: ACS Omega; 2020 May 05; 5(17):9641-9648. PubMed ID: 32391449.
    Abstract:
    For improving the CO2 adsorption capacity of solid-supported amines, five commercial porous supports have been selected and impregnated with tetraethylenepentamine (TEPA), and their CO2 adsorption performances have been evaluated using a fixed-bed reactor coupled with mass spectrometry. For solid-supported amines, CO2 adsorption capacities coincide with the texture characterization of the adsorbent supports (mesoporous alumina, montmorillonite, silica gel, porous resin, MCM-41 molecular sieve), and the optimum TEPA loading amount is mainly affected by the pore volume. The mesoporous supports were found to be more conducive to uniform loading of organic amine, with more than 370 mg/g CO2 adsorbed per unit TEPA. Other components in flue gas, especially H2O, favor CO2 adsorption on solid-supported amines. SO2 inhibited the CO2 adsorption, which was mainly attributable to the strong and irreversible binding of SO2 on some amine sites. NO had little effect on CO2 adsorption. Thermal stabilities of solid-supported amines have been tested based on thermogravimetry curves, and the main weight loss peak for TEPA appears at 513 K for solid-supported amines. Linear and step regeneration modes have been compared, revealing that the temperature for step regeneration is 37 K lower than that for the linear regeneration mode. Moreover, the desorption peak area for the step regeneration mode is 20% higher than that for the linear regeneration mode, indicating that the step regeneration mode can be used in practical applications, to reduce energy consumption during regeneration.
    [Abstract] [Full Text] [Related] [New Search]