These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: The Role of Transverse Connectors in C1-C2 fixation for Atlantoaxial Instability: Is It Necessary? A Biomechanical Study.
    Author: Li T, Ma C, Du YQ, Qiao GY, Yu XG, Yin YH.
    Journal: World Neurosurg; 2020 Aug; 140():e212-e218. PubMed ID: 32438009.
    Abstract:
    OBJECTIVE: To investigate the biomechanical effect of C1 lateral mass-C2 pedicle screw-rod (C1LM-C2PS) fixation with and without transverse connectors (TC) in an atlantoaxial instability (AAI) model. METHODS: Ten freshly frozen cadaveric specimens were tested using an industrial robot under the following conditions: intact model, AAI model, C1-C2 model, C1-C2 with one TC model, and C1-C2 with two TCs model. Three types of motion, flexion-extension (FE), lateral bending (LB), and axial rotation (AR), were applied (1.5 Nm) to the specimens. The range of motion (ROM) and neutral zone (NZ) between C1 and C2 in all directions were measured. RESULTS: Compared with those of the intact and AAI models, the C1-C2 ROM and NZ of all instrumented groups were decreased significantly in each direction of loading motion (P < 0.05). The mean FE ROM in the no TC, 1 TC, and 2 TC groups was 2.12° ± 0.41°, 2.29° ± 0.42°, and 2.04° ± 0.69°, respectively (P = 0.840, 0.981, 0.628, respectively); the mean LB ROM in the 3 intervention groups was 1.26° ± 0.67°, 1.02° ± 0.51° and 1.03° ± 0.57°, respectively (P = 0.489, 0.501, 1.000, respectively). During AR, the ROM and NZ of the no TC group (3.19° ± 0.89° and 1.51° ± 0.42°) were significantly reduced by more than 60% compared with those in the 1 (0.98° ± 0.28° and 0.40° ± 0.11°) and 2 TC groups (1.17° ± 1.69° and 0.42° ± 0.61°) (P < 0.001). Two TCs were equivalent for all loading motions to 1 TC (P > 0.05). CONCLUSIONS: Adding TCs to C1LM-C2PS can effectively decrease the axial rotation ROM and enhance the stability of C1-C2 segment. Therefore, it is necessary to use TC-strengthened C1 lateral mass -C2 pedicle screw-rod fixation in patients with instability of C1-C2.
    [Abstract] [Full Text] [Related] [New Search]