These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Electrochemical oxidation for decolorization of Rhodamine-B dye using mixed metal oxide electrode: modeling and optimization.
    Author: Kothari MS, Shah KA.
    Journal: Water Sci Technol; 2020 Feb; 81(4):720-731. PubMed ID: 32460275.
    Abstract:
    In the study the electrochemical oxidation process for decolorization of Rhodamine-B dye was studied using an anode coated with mixed metal oxides: TiO2, RuO2, and IrO2. Batch experimental studies were conducted to assess the effect of four important performance variables, current density, electrolyte concentration, initial pH and electrolysis time, on the decolorization and energy consumption. The process was modeled using an artificial neural network. Response surface methodology using central composite design (CCD) was utilized for optimization of the decolorization process. Based on the experimental design given by CCD, the results obtained by the statistical analysis show that the electrolysis time was the most influential parameter for decolorization whereas the current density had the greatest influence on the energy consumption. According to the optimized results given by the CCD model, maximum color removal of 97% and minimum energy consumption of 1.01 kWh/m3 were predicted in 4.9 minute of electrolysis time, using 0.031 M NaCl concentration at current density 10 mA/cm2 and an initial pH of 3.7. A close conformity was observed between the optimized predicted results and experimental results. The process was found to be efficient and consisted of indirect chemical oxidation producing strong oxidizing agents such as Cl2, HClO and OCl-.
    [Abstract] [Full Text] [Related] [New Search]