These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


PUBMED FOR HANDHELDS

Search MEDLINE/PubMed


  • Title: The Hip Suction Seal, Part II: The Effect of Rim Trimming, Chondrolabral Junction Separation, and Labral Repair/Refixation on Hip Distractive Stability.
    Author: Utsunomiya H, Storaci HW, Rosenberg SI, Kemler BR, Dornan GJ, Brady AW, Philippon MJ.
    Journal: Am J Sports Med; 2020 Sep; 48(11):2733-2739. PubMed ID: 32762632.
    Abstract:
    BACKGROUND: The acetabular labrum contains free nerve endings, and an unstable labrum can result in increased femoral head movement during hip motion. This can be caused by chondrolabral junction (CLJ) separation, especially in association with pincer-type femoroacetabular impingement, and may contribute to hip pain. HYPOTHESIS: Rim resection alone has no effect on suction seal biomechanics. Further, separation of the CLJ changes hip suction seal biomechanics when compared with those of the native state, whereas repair and refixation with suture anchors restore these biomechanical parameters. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 12 fresh-frozen human cadaveric hips were used in this study. Hips were mounted in a saline bath on a dynamic tensile testing machine and were distracted at a rate of 0.5 mm/s from neutral position. A total of 3 parameters (force, displacement, and intra-articular pressure) were measured throughout testing. Before testing, hips were randomly allocated to 1 of 2 groups: 1 that included the CLJ separation (CLJ Cut group) and 1 that did not (CLJ Intact group). Hips were tested in the following states: (1) native, (2) rim trimming, (3) separated CLJ (CLJ Cut group only), and (4) labral repair/refixation. For each group a linear mixed-effects model was used to compare biomechanical parameters between states. RESULTS: Rim trimming did not affect any suction seal parameters relative to those of the native state. In the CLJ Cut group, no significant difference in distance to break the suction seal was observed for any states compared with that of the native state. In the CLJ Intact group, the distance to break the suction seal was significantly shorter in the labral refixation state (1.8 mm) than the native state (5.6 mm; P = .002). The maximum distraction force (62.1 ± 54.1 N) and the peak negative pressure (-36.6 ± 24.2 kPa) of the labral repair/refixation state were significantly lower than those of the native state in both groups (93.4 ± 41.7 N, P = .01; -60.7 ± 20.4 kPa, P = .02). CONCLUSION: Rim trimming did not change the biomechanical properties of the labral suction seal. Labral refixation resulted in a shorter distance to break the labral suction seal. This indicates that labral mobility is reduced by the labral refixation procedure, which could be beneficial in postoperative pain relief and labral healing. CLINICAL RELEVANCE: The labral refixation reduced labral mobility, which could be beneficial for both pain relief and labral healing to the acetabulum after pincer-type femoroacetabular impingement resection.
    [Abstract] [Full Text] [Related] [New Search]