These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: 3D Printed Long-Range Cavity Structure UHF RFID Tag Antenna with Painting Conductive Ink on Convex Surface.
    Author: Byondi FK, Chung Y.
    Journal: Sensors (Basel); 2021 Feb 18; 21(4):. PubMed ID: 33670441.
    Abstract:
    In this paper, we describe a long-range convex cavity-type passive ultra-high-frequency (UHF) radio frequency identification (RFID) tag to use on various metal and non-metal surfaces, for IoT sensor energy harvesting. The tag antenna is built on the 3D printed cavity structure with polylactic acid (PLA) plastic and painted with the conductive ink on the 1 mm protruding area (convex) of inner surface and the side-walls of the cavity structure to form a cavity structure. The tag is designed to operate in the UHF band (840-960 MHz). This long-range cavity tag antenna (CTA) works at both 920 MHz and 915 MHz UHF RFID frequencies. It provides a linear polarized (LP) frontal reading range of 35 m and side reading range above 15 m when mounted on either metal or non-metal objects. We describe the antenna characteristics, structure, modeling, simulation, and experimental results. A mathematical reading range also was calculated and compared with experimental data.
    [Abstract] [Full Text] [Related] [New Search]