These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Cyclopropenium Cationic-Based Covalent Organic Polymer-Enhanced Poly(ethylene oxide) Composite Polymer Electrolyte for All-Solid-State Li-S Battery.
    Author: Wang Y, Ji H, Zhang X, Shi J, Li X, Jiang X, Qu X.
    Journal: ACS Appl Mater Interfaces; 2021 Apr 14; 13(14):16469-16477. PubMed ID: 33813826.
    Abstract:
    Cyclopropenium cationic-based covalent organic polymer (iCP@TFSI) was successfully prepared through the SN2 reaction and ion replacement process, which can be incorporated into the PEO/LiTFSI matrix as a filler. The obtained solid-state polymer electrolytes were utilized for an all-solid-state lithium-sulfur (Li-S) battery. Padding iCP@TFSI into the PEO matrix not only has a positive influence on both the ionic conductivity and the mechanical capacity of solid-state polymer electrolytes but also increases the stability of the lithium metal anode, which essentially improves the overall cycling ability of all-solid-state Li-S batteries. Among the membranes attained, the PEO-10%iCP@TFSI electrolyte displays the best ionic conductivity up to 1.2 × 10-3 S·cm-1 at 80 °C. The symmetrical lithium battery exhibits higher cycle stability (600 h) due to the higher mechanical properties related to more stable lithium metal interfaces. The Li-S battery based on the PEO-10%iCP@TFSI electrolyte exhibits excellent electrochemical performance with better Coulombic efficiency and outstanding cycling stability. Its capacity is maintained at 490 mAh·g-1 after 500 cycles at 1 C with a 0.032% decay rate each cycle, and the Coulombic efficiency is close to 100% during the whole cycling.
    [Abstract] [Full Text] [Related] [New Search]