These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Thermal treatment of Lanxess Lewatit® AF 5 resin used in the atmospheric chalcopyrite leaching process: Regeneration and sulfur recovery.
    Author: Marzoughi O, Li L, Pickles C, Ghahreman A.
    Journal: Chemosphere; 2022 May; 295():133890. PubMed ID: 35134403.
    Abstract:
    Elemental sulfur is a key component in the acidic Albion chalcopyrite atmospheric leaching process and is a challenging issue in the residue. It has been proposed to use Lanxess Lewatit® AF 5 (AF 5) catalyst during the leaching of copper concentrates in the acidic Albion leach process, to eliminate the elemental sulfur from the leach residue. When using AF 5 during leaching, the copper and the iron recoveries were above 95% and 80%, respectively. The AF 5 collected 100% of the elemental sulfur and for a 1:1 ratio of AF 5 to concentrate, the loaded AF 5 gained 12.3 wt% sulfur after the first acidic Albion leach test and contained 24.3 wt% sulfur after two leaching tests. In this study, the optimum conditions for the removal of sulfur from the catalyst were investigated using a high temperature process in a laboratory tube furnace. The results indicated that the maximum desulfurization of 90.1% was achieved at 550 °C after 10 min. The regenerated AF 5 could be reused for several chalcopyrite leaching-AF 5 cycles. For the recycled AF 5, the sulfur absorption decreased by only 1.0% while the recoveries of copper and iron were not affected. The kinetic study showed that the activation energy for AF 5 desulfurization was 164.5 kJ/mol.
    [Abstract] [Full Text] [Related] [New Search]