These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Impacts of sampling-tube loss on quantitative analysis of gaseous semi-volatile organic compounds (SVOCs) using an SPME-based active sampler.
    Author: Cao J, Xie S, Cheng Z, Li R, Xu Y, Huang H.
    Journal: Chemosphere; 2022 Aug; 301():134780. PubMed ID: 35500633.
    Abstract:
    Active samplers are widely used in the quantification of gaseous semi-volatile organic compounds (SVOCs). A sampling tube is often assembled upstream of the sampler, especially in the active samplers used for separating the particle-phase and gas-phase SVOCs and in the newly-designed active sampler based on solid-phase microextraction (SPME). However, gaseous SVOCs can be easily adsorbed by the sampling tube, which may induce significant errors to the quantitative results. Taking the SPME-based active sampler as an example, a mass-transfer model was developed to characterize the sampling-tube loss of gaseous SVOCs. Experiments involving six SVOCs were conducted. The model predictions (with a best-fit surface/air partition coefficient of SVOCs) were found to be consistent with the measurements. Both model predictions and experimental data indicated that the measured concentrations were significantly lower than the actual concentration (around 60% lower) due to the sampling-tube loss. The duration of sampling-tube loss (τe, minutes to days) varied with the volatility of SVOCs (vapor pressure, Vp), i.e., log τe linearly increased as increasing log Vp. The relationship could be helpful for determining the sampling strategies to eliminate (reduce) the effects of sampling-tube loss according to the volatility of SVOCs. The above conclusions may be also applicable for other active samplers of gaseous SVOCs. However, further studies are required to quantify the effects of sampling-tube loss for other active samplers due to the difference in the size and shape of the sampling tube between them and the SPME-based active sampler. The corresponding mass-transfer model and experimental procedure may require adjustment as appropriate.
    [Abstract] [Full Text] [Related] [New Search]