These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


PUBMED FOR HANDHELDS

Search MEDLINE/PubMed


  • Title: Experimental investigation on the performance characteristics and emissions of a CI engine fueled with enhanced microwave-assisted Karanja seed bio-oil.
    Author: Anbu M, Balakichenin R, Muthaiyan P, Sundaramoorthy S, Amesho KTT, Subramani V.
    Journal: Environ Sci Pollut Res Int; 2023 Dec; 30(60):125006-125018. PubMed ID: 36418832.
    Abstract:
    The main objective of the present research work is to utilise the produced bio-oil from microwave pyrolysis of Karanja, a non-edible seed, as fuel for diesel engines by increasing some up-gradation in the quality of the fuel. The emulsification process is carried out to improve the stability of the diesel-bio-oil blend using SPAN 80 and TWEEN 80, which lasted for 28 days without any layer separation termed as EKB20. The addition of 5% DEE and 10% DEE into EKB20 is done to enhance the combustion characteristics of the diesel engine. The produced bio-oil fuels were tested in a Kirloskar make, four-stroke, single-cylinder, direct injection diesel engine of 5.2 kW rated power output. The addition of DEE reduces the peak pressure by 4 bar and increases the heat release rate due to the higher volatility of DEE. At full load conditions, the thermal brake efficiency improved by 9.31% and 14.11%, respectively, compared to EKB20. Adding 5% DEE and 10% DEE at the rated power output reduced the smoke density by 18.42% and 60.25%, respectively, compared to EKB20 and 5% and 4% compared to diesel. The addition of 5% DEE and 10% DEE shows a 39% and 51% increase in NOX concentration and a 90% reduction in CO emission at the maximum brake power output. Hence, it is concluded that the fuels EKB20 + 5% DEE and EKB20 + 10% DEE can be used as alternative fuels for diesel engines.
    [Abstract] [Full Text] [Related] [New Search]