These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Fracture strength of screw-retained zirconia crowns assembled on zirconia and titanium implants.
    Author: Sadid-Zadeh R, Lin K, Li R, Nagy K.
    Journal: J Prosthodont; 2024 Mar; 33(3):273-280. PubMed ID: 36973859.
    Abstract:
    PURPOSE: This in vitro study evaluated the fracture strength of screw-retained zirconia crowns connected to zirconia (Zr) and titanium (Ti) implants after undergoing a simulation of 5 years of clinical use. MATERIALS AND METHODS: Forty-eight screw-retained zirconia crowns were fabricated and assembled on four implant systems, with 12 in each group: (1) Zr implant (pure ceramic; Straumann AG) (PZr); (2) Zr implant (NobelPearl; Nobel Biocare) (NPZr); (3) Ti-Zr implant (Bone Level Roxolid; Straumann AG) (RSTiZr); (4) Ti implant (Conical Connection PMC; Nobel Biocare) (NRTi). Crowns were luted to their associated abutments using resin cement and then torqued to their assigned implants at the recommended torque value. Specimens were subjected to dynamic loading for 1,200,000 loading cycles. Fracture strength, measured in Newtons (N), was tested under static compression load using a universal testing machine at an angle of 30°. One-way ANOVA and Tukey's multiple comparisons post hoc test were used to compare the mean fracture values between the groups at a significance level of 0.05. RESULTS: The average fracture strengths for the RSTiZr and NRTi groups were 1207 ± 202 and 1073 ± 217 N, respectively, which was significantly (p < 0.0001) higher than the PZr and NPZr groups (712 ± 76 and 571.6 ± 167 N, respectively). However, no significant difference was found between the fracture strength value of RSTiZr and NRTi (p = 0.260) or PZr and NPZr (p = 0.256) groups. CONCLUSIONS: Zirconia crowns connected to Zr implants have the potential to withstand the average physiological occlusal forces which occur in the anterior and premolar regions.
    [Abstract] [Full Text] [Related] [New Search]