These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Starch modified NiFe layered double hydroxide composites for better adsorption and photocatalytic removal of reactive dye and piroxicam-20 drug.
    Author: Bansal M, Pal B.
    Journal: Environ Sci Pollut Res Int; 2023 Jun; 30(29):73825-73848. PubMed ID: 37195617.
    Abstract:
    One of the most omnipresent problems to the environment is the efficient removal of textile dyes and non-steroidal drugs from wastewater. For this purpose, renewable, sustainable, and biodegradable biopolymers are used. In this study, starch (S) modified NiFe-layered double hydroxide (LDH) composites were successfully synthesized by the co-precipitation method and have been examined as a catalyst for the effective adsorption of reactive blue 19 dye, reactive orange 16 dye, and piroxicam-20 NSAID from wastewater and photocatalytic degradation of reactive red 120 dye. The physicochemical properties of the prepared catalyst were assessed by XRD, FTIR, HRTEM, FE-SEM, DLS, ZETA, and BET. The coarser and more porous micrographs are shown in FESEM, indicating the homogeneous dispersion of layered double hydroxide on starch polymer chains. The S/NiFe-LDH composites have a slightly greater SBET (6.736 m2/g) than NiFe LDH (4.78 m2/g). The S/NiFe-LDH composite shows remarkable ability in the removal of reactive dyes. The band gap value of NiFe LDH, S/NiFe LDH (0.5:1), and S/NiFe LDH (1:1) composites was calculated as 2.28 eV, 1.80 eV, and 1.74 eV, respectively. The qmax assessed from Langmuir isotherm for removal of piroxicam-20 drug, reactive blue 19 dye, and reactive orange 16 was 2840 mg/g, 149.47 mg/g, and 182.4 mg/g, respectively. The activated chemical adsorption without product desorption is predicted by the Elovich kinetic model. With reactive red 120 dye, S/NiFe-LDH shows photocatalytic degradation within 3 h of irradiation of visible light with 90% removal efficiency and follows a pseudo-first-order kinetic model. The scavenging experiment confirms the involvement of electrons and holes in photocatalytic degradation. With a little decline in adsorption capacity up to five cycles, starch/NiFe LDH was easily regenerated. So, the suitable adsorbent required for wastewater treatment is nanocomposites of LDHs and starch as they enhance the chemical and physical attributes of the composite structure with greater absorption capabilities.
    [Abstract] [Full Text] [Related] [New Search]