These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Split injection strategy control map development through prediction-based calibration approach to improve the biodiesel-fuelled diesel engine characteristics.
    Author: Bragadeshwaran A, Rajasekar V, Usman KM, Ayyasamy T, Govindasamy K.
    Journal: Environ Sci Pollut Res Int; 2024 Sep; 31(41):53895-53919. PubMed ID: 37730985.
    Abstract:
    Karanja oil blended with diesel acts as a good alternative for a CI engine due to its low emission and high oxygen content as compared to pure diesel which leads to the non-toxic and biodegradable nature of the fuel. The objective of this project is to enhance the performance and emission characteristics of a diesel engine that runs on biofuel by accurately calibrating its fuel injector control parameters. To achieve this goal, the project focuses on creating optimal split injector control maps using a novel global model-based calibration approach that considers the entire range of engine speed-load conditions. To develop the model, the experimentation was conducted using the I-optimal design of the experiment technique. To establish a relationship between the calibration parameters and engine performance parameters based on experimental data, the study employed response surface methodology (RSM). With the support of a developed model and multi-objective optimization approach under equivalent importance to performance and emissions, the optimum injector control points are derived. For the developed engine map for 20% KBD (Karanja bio-diesel)-blended fuel, the BTE (brake thermal efficiency) reaches up to 30% and lower BSFC (brake specific fuel consumption) of 0.37 kg/kW-hr. After optimization, the split injector control map showed significant improvements over the un-optimized map. At 19 Nm and 3000 rpm, the optimized map resulted in a 31.36% increase in BTE and a 29.31% decrease in BSFC. Moreover, the optimization successfully balanced the trade-off between reducing nitrogen oxide (NOx) emissions and smoke emissions. However, the optimized fuel map for 20% KBD-blended fuel shows slightly lower performance compared to diesel fuel. While the optimization process led to a decrease in smoke emissions about 22.3%, it also resulted in elevated NOx emissions about 9.83% when compared to diesel fuel. Furthermore, emissions of CO and HC are reduced by 12.8% and 19.2%, respectively, in an optimized control map of 20% KBD-blended fuel compared to un-optimized map.
    [Abstract] [Full Text] [Related] [New Search]