These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Meta-structure enhanced second harmonic S0 waves for material microstructural changes monitoring.
    Author: Liu Z, Shan S, Cheng L.
    Journal: Ultrasonics; 2024 Apr; 139():107295. PubMed ID: 38489848.
    Abstract:
    Cumulative second harmonic Lamb waves in nonlinear media feature increasing amplitudes with propagation distance, conducive to the monitoring of material microstructural changes in structures. The phenomenon can be readily generated by zero-order symmetric (S0) mode waves in the low-frequency range. However, in a practical piezoelectric-transducer-activated system, both S0 and A0 (zero-order antisymmetric) mode Lamb waves are inevitably excited, while only the former is responsible for cumulative effects. The generation efficiency of the cumulative second harmonics is then affected by the presence of the A0 waves. To tackle the problem, this study develops a metamaterial structure, referred to as a meta-structure, to tactically enhance the cumulative second harmonic S0 Lamb waves by converting the A0 mode components into S0 mode waves. Topology optimization is conducted to design the meta-structure, which is surface-mounted onto the structure under inspection, to achieve high-efficiency A0-to-S0 wave mode conversion. Through tuning the parameters and constraints of the optimization, the designed single-sided meta-structure breaks the structural symmetry in the thickness direction, while facilitating its practical implementation. Typical scenarios with different meta-structure materials are discussed. Numerical simulations demonstrate that the strain amplitudes of the fundamental S0 mode waves can be increased by 60% with the deployment of the meta-structure, alongside an enhancement of the second harmonic S0 mode waves at different sensing distances. Finally, the designed meta-structure is fabricated via 3D printing technique and tested experimentally on an aluminum plate subjected to thermal aging treatment for monitoring the heating-induced microstructural changes inside the structure. Experimental results confirm an increase in the wave amplitudes of the linear S0 mode waves with the assistance of the meta-structure. The developed system improves the sensitivity of nonlinear Lamb wave-based monitoring methods in characterizing material microstructural changes, which shows great promise for detecting incipient damage in practical structural health monitoring applications.
    [Abstract] [Full Text] [Related] [New Search]