These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Comparative thermal assessment and emission analysis of various green biodiesel from novel feedstocks for CI engines: a sustainable approach towards emission reduction.
    Author: Rajpoot AS, Choudhary T, Chelladurai HM, Sinha AA, Pachori H.
    Journal: Environ Sci Pollut Res Int; 2024 Jun; 31(27):39650-39662. PubMed ID: 38829501.
    Abstract:
    In order to replace conventional diesel, biodiesel from various feedstocks is being researched for diesel engines. This study explores novel biodiesel blends produced from unconventional resources such as mentha piperita (peppermint), pontederia crassipes (water hyacinth), tamarindus indica (tamarind), and trichosanthes cucumerina (snake gourd) to assess the outcomes of a diesel engine. The fuel samples are designated as MP20, PC20, TC20, and TI20, which consist of 80% biodiesel and 20% diesel. The assessment is carried out on a four-stroke, one-cylinder diesel engine that is water-cooled and set to operate at 1500 rpm with a 17.5 compression ratio under various engine loading scenarios with quarter-incremental loading from one-fourth to full loading conditions. The fuel samples are injected with 220 bar injection pressure into the combustion chamber 23° before TDC. An extensive analysis of engine parameters is performed using engine configuration, fuel characteristics, and applied boundary conditions. This comprises brake-specific energy consumption (BSEC), fuel consumption (BSFC), thermal efficiency (BTE), cylinder pressure (CP), heat release rate (HRR), particulate matter (PM), nitrogen oxide (NOx), and carbon dioxide (CO2) emissions. At 100% load, the biodiesel blends show an increase in BSFC (2.8-12.6%) and BSEC (1.1-7.1%) but a minor decrease in CP (0.9-6.9%), HRR (0.8-16.2%), and BTE (1.2-2.9%). For biodiesel blends at full engine load, the emissions of PM (8.9-21.4%), NOx (1.4-16.2%) and CO2 (2.4-7.9%) are all significantly reduced. The results emphasize the distinct benefits of biodiesel blends, demonstrating enhanced engine performance and substantial decreases in emissions, which supports the aim of providing sustainable energy solutions.
    [Abstract] [Full Text] [Related] [New Search]