These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Method for fabricating a mesh ripple filter for charged-particle therapy.
    Author: Tanaka S, Inaniwa T.
    Journal: Phys Med Biol; 2024 Jul 10; 69(14):. PubMed ID: 38941999.
    Abstract:
    Objective.A simple, low-cost ripple filter consisting of multiple mesh sheets (mRiFi) was previously developed to reproducibly widen the Bragg peak of heavy-ion beams. To fabricate the mRiFi, the mRiFi parameters such as the wire material, wire diameter, wire spacing, and number of mesh sheets had to be determined. However, it was unclear how these parameters contribute to shifting and widening of the Bragg peak as well as to lateral spreading of the beam passing through the mRiFi. The purposes of this study were to clarify the contributions and to propose a recipe for fabricating a mRiFi with the desired performance values.Approach. We established an analytical calculation method to estimate shifting and widening of the Bragg peak and lateral spreading of heavy-ion beams passing through the mRiFi for given mRiFi parameter values. We also performed Monte Carlo simulations to validate the analytical calculation method. The recipe for fabricating the mRiFi with desired performances was established based on the analytical calculation method. Using the recipe, we fabricated the mRiFi for multi-ion therapy and evaluated its performance through demonstration experiments with helium-, carbon-, oxygen-, and neon-ion beams.Main results.The difference between the results of the Monte Carlo simulation and the analytical calculation was less than 0.4 mm for the peak shift, 0.15 mm for the peak width, and less than 0.11 mm for the lateral beam size which validated the analytical calculation method. The experimentally observed shift and width of the Bragg peak were consistent with the analytical calculations.Significance.We proposed a method to determine mRiFi parameters for fabricating a mRiFi with a desired performance, i.e. adequate widening of the Bragg peak with an acceptable peak shift and lateral beam spread. The proposed method allows anyone to fabricate a simple and low-cost mRiFi satisfying desired specifications.
    [Abstract] [Full Text] [Related] [New Search]