These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Effect of mercury on corrosion of eta' Cu-Sn phase in dental amalgams.
    Author: Ogletree RH, Marek M.
    Journal: Dent Mater; 1995 Sep; 11(5):332-6. PubMed ID: 8595831.
    Abstract:
    OBJECTIVES: The eta' Cu-Sn phase is the most corrosion-susceptible major component of the microstructure in high-copper dental amalgams, even though metallurgically prepared specimens of the phase are corrosion-resistant. The purpose of this study was to determine if mercury is the cause of the degradation. METHODS: Specimens of metallurgically prepared eta' Cu-Sn phase were tested in synthetic saliva using electrochemical methods. Mercury was adsorbed on the surface by exposure to mercury vapor, and the changes in the corrosion potential and anodic polarization characteristics were determined. Galvanic currents between eta' specimens and a high-copper dental amalgam were measured for both Hg-free and Hg-contaminated eta' electrodes. RESULTS: The Hg-free eta' phase showed a wide region of passivity. Exposure to mercury made the eta' phase electrochemically more active, and current peaks appeared on the polarization curves. The Hg-free eta' electrode was a cathode to a high-copper dental amalgam. The Hg-contaminated eta' electrode started also as a cathode, but became anode after a period of exposure. SIGNIFICANCE: It was concluded that mercury destabilizes the protective passive film on the eta' phase, making the phase more susceptible to corrosion in the oral environment. The results of the galvanic current measurements seem to indicate that the galvanic interaction between eta' and the other phases facilitates the mercury-related degradation.
    [Abstract] [Full Text] [Related] [New Search]