These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: [Biomechanics of the pubic symphysis. Which forces lead to mobility of the symphysis in physiological conditions?].
    Author: Meissner A, Fell M, Wilk R, Boenick U, Rahmanzadeh R.
    Journal: Unfallchirurg; 1996 Jun; 99(6):415-21. PubMed ID: 8767137.
    Abstract:
    For estimation of the loads of fixation devices, physiological movements and acting forces at the symphysis pubis are examined. Experimentally, Walheim determined the movements of the pubic symphysis under physiological conditions (one-leg stance, walking): there is no effective mobility in the horizontal direction. During the one-leg stance he observed symphyseal mobility of up to 2.6 mm (Phi 1.2 mm) in the vertical direction and 1.3 mm (Phi 0.6 mm) in the sagittal direction. During walking he found symphyseal mobility of up to 2.2 mm (Phi 0.9 mm) in the vertical direction and 1.3 mm (Phi 0.6 mm) in the sagittal direction. Until now the forces leading to symphyseal mobility have not been estimated either experimentally or mathematically. In our experimental study we examined ten fresh cadaver anterior pelvic rings by means of a multidirectional force-mobility measurement. Maximal physiological movements, as determined by Walheim, were increasingly induced in ten equal steps, and the forces required were measured for every single step. Out of the resulting force-mobility curves for the ten cadaver specimens the mean force required (with standard deviation) was calculated for each of the ten measure points, separately for the vertical (y-) direction and sagittal (z-) direction. The values were graphically transferred, and a regression curve was created. This curve allows the acting force to be estimated for every movement of the pubic symphysis: During the one-leg stance the mean force to induce mean mobility is 169 N in vertical direction and 148 N in sagittal direction; for maximal mobility a force of 398 N in the vertical direction and 148 N in the sagittal direction is necessary. During walking, the force required to induce mean movement of the symphysis pubis is 120 N in the vertical direction and 68 N in the sagittal direction; for maximal mobility 333 N is required in the vertical direction and 136 N in the sagittal direction. For mobilization of patients with a symphyseal rupture (type Tile B 1) with partial weight-bearing, neutralization of the mean acting forces during the one-leg stance (169 N in the vertical direction, 68 N in the sagittal direction) must be achieved by an adequate fixation device. In cases where full weight bearing is desirable, such as in patients with limited compliance, stability can only be reached by neutralization of the maximal acting forces during walking (333 N in the vertical direction, 136 N in the sagittal direction).
    [Abstract] [Full Text] [Related] [New Search]