These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: [Refractory ceramic fibers, kinds, health effects after exposure, TLVs].
    Author: Woźniak H, Wiecek E.
    Journal: Med Pr; 1996; 47(4):393-9. PubMed ID: 8847986.
    Abstract:
    Ceramic fibres are amorphous or crystalline synthetic mineral fibres which are characterised by refractory properties (i.c. stability in temperature above 1000 degrees C). In general, ceramic fibres are produced from aluminium oxide, silicon oxide and other metal oxides and less frequently from non-oxide materials such as silicon carbide, silicon nitride and boron nitride. In Poland, the production of ceramic fibres was begun in the Refractory Materials Plant, Skawina, during mid-eighties. The production capacity accounts for about 600 tons annually. It is estimated that approximately 3000 persons are exposed to the effect of ceramic fibres in Poland. During the production of ceramic fibres, concentrations of respiral fibres in the air at work places range from 0.07 to 0.27 f/cm3; during the manufacture of ceramic fibre products from 0.23 to 0.71 f/cm3 and during the application of ceramic fibre products from 0.07 to 1.67 f/cm3. As published data depict, fibres longer than 5 microns are most common in the work environment, and the proportion of fibres with diameters below 1 micron accounts for 40-50%. Bearing in mind the present situation in Poland, namely combined exposure to asbestos (during removal of worn out heat-insulating materials) and ceramic fibres (during installation of new insulation), as well as in view of own investigations and literature data which evidence a strong carcinogenic effect of certain fibres, the following MAC values have been adopted: Dusts of refractory ceramic fibres: total dust-2 mg/m3; respirable fibres-1 f/cm3 (L > 5 microns; D < 3 microns; L: D < 3:1) Dusts of reflactory ceramic fibres mixed with asbestos: total dust-1 mg/m3; respirable fibres-1 f/m3. Dusts of refractory ceramic fibres mixed with other man-made mineral fibres (MMMF): total dust-2 mg/m3; respirable fibres-1 f/m3. According to the IARC, ceramic fibres have been included into group 2B-suspected human carcinogen.
    [Abstract] [Full Text] [Related] [New Search]