These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Effect of skeleton size on the performance of octadecylsilylated continuous porous silica columns in reversed-phase liquid chromatography.
    Author: Minakuchi H, Nakanishi K, Soga N, Ishizuka N, Tanaka N.
    Journal: J Chromatogr A; 1997 Feb 21; 762(1-2):135-46. PubMed ID: 9098972.
    Abstract:
    We prepared continuous porous silica rods that had silica skeletons with sizes of 1.0-1.7 microns and through-pores of 1.5-1.8 microns, and evaluated their performance as a column in reversed-phase liquid chromatography. The mesoporous silica monoliths (mesopore size: 14 or 24 nm) were derivatized to C18 phase by on-column reaction with octadecyldimethyl-N,N-diethylaminosilane. The C18 silica rods gave minimum plate heights of 10-15 microns for aromatic hydrocarbons in 80% methanol and of 20-30 microns for insulin in acetonitrile-water mixtures in the presence of trifluoroacetic acid. The performance of the silica rods at a high flow-rate was much better than that of conventional columns packed with 5 microns C18 silica particles with pores of 12 or 30 nm, especially for high-molecular-mass species. Silica rods with the smaller sized silica skeletons resulted in Van Deemter plots showing a minimum plate height linear velocity of the mobile phase and a smaller dependence of plate height on the linear velocity. Separation impedance of less than 1000 was achieved with the continuous silica columns. The higher performance and lower pressure drop of silica rods at high flow-rates compared with particle-packed columns is provided by the small silica skeletons and large through-pores.
    [Abstract] [Full Text] [Related] [New Search]