These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.
Pubmed for Handhelds
PUBMED FOR HANDHELDS
Search MEDLINE/PubMed
Title: [Causes for the reaction between dry soda lime and halogenated inhalation anesthetics]. Author: Förster H, Dudziak R. Journal: Anaesthesist; 1997 Dec; 46(12):1054-63. PubMed ID: 9451489. Abstract: All volatile anesthetics undergo chemical breakdown to multiple, partly identified degradation products in the presence of dry soda lime. These chemical reactions are highly exothermic, ranging from 100 degrees C for halothane to 120 degrees C for sevoflurane. The increase in temperature correlates with the moisture content of the soda lime, being maximal below 5%. Sevoflurane and isoflurane were exposed to dry soda lime in a circle system. The anaesthetic gas was condensed in a series of cold temperature traps and the degradation products of the volatile anesthetics were analysed using GC/MS. Surprisingly, neither sevoflurane nor its degradation products could be measured in the gas-flow emerging from the soda lime during the first 15-20 min of exposure. After 20 minutes, larger quantities of methanol, compounds C and D as well as compounds A and B were detected. After 40-60 min of exposure, sevoflurane's degradation markedly decreased and unaltered sevoflurane emerged from the soda lime canister. Additionally, using isoflurane in the same experimental set-up resulted in various degradation products due to its reaction with dry soda lime. Obviously, all volatile anesthetics are prone to such a reaction. In conclusion, sevoflurane and isoflurane react with dry soda lime. These reactions are caused by the presence of two components of soda lime, sodium hydroxide and potassium hydroxide. A modification of soda lime to prevent its reaction with volatile anaesthetics is discussed.[Abstract] [Full Text] [Related] [New Search]